Inthis "How to" Alfa Romeo Giulietta video we change the oil and oil filter, and show you a useful tip to keep things tidy and clean. Another success, no fa
Toreset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure. Place the ignition in the ON position. (Do not start the engine.) Fully push the accelerator pedal AlfaRomeo Giulietta coolant dashboard warning light - this warning light illuminates when engine coolant drops below a pre-determined level. If this occurs, top-up the coolant at the earliest opportunity. If the light illuminates again within a short period of time, seek qualified assistance. Alfa Romeo Giulietta oil pressure dashboard warning MultiairUnit Replacement: Remove the engine cover with a short, sharp tug at each corner. Remove the metal breather pipe Using a set of Clik Pliers, and a 10mm Hex socket. Remove the oil separator – 3x bolts with 10mm hex socket. Disconnect the electrical connections to the 4x coils and 4x MA unit solenoids by sliding the yellow tabs C7nA.