Posted January 29, 2014. I have just had the DPF fluid topped up at Ford and a forced regeneration carried out. No problems with that. However they state there is a further fault showing (and hence the engine malfunction light is still on) that states that the DPF fluid tank needs replacing at a cost of over £500!
Hi, I have a 2010 Ford Focus 1.6 TDCI 110bhp. When looking on Forscan, I only have two options for the DPF readings. They are DP_DPF for the pressure and PPFT for pre filter temperature.
2007 ford focus 2.0 tdci. Im trying to bleed the fuel system after an engine overhaul. the pump was fine before but now is hardly giving hardly any pressure. what voltage required at the regulator. Ford Cars & Trucks
3.Fit a new oil feed pipe, oil feed connectors and oil drainpipes and hoses. 4. 4.Remove the gauze filter that is in the new banjo bolt that secures pipe to block. 5.Remove oil cooler and oil filter assembly and clean thoroughly. 6)Remove intercooler, pipes and hoses remove residual oil. 1.8 L I4 Duratec HE FFV ( Flexifuel vehicle) 2.0 L I4 Duratec HE. 2.0 L I4 Diesel TDCI. 2.5 L I5 Turbocharged T. diagnosing any engine. step 1 is engine. and step 2 is blown fuses. and step 3 is read the TSBs on your car. (tech .serv. bul) Jul 10, 2014 • 2006 Ford Focus.
Procedure is shown how to replace and bleed the fuel system of ford transit connect 1.8L TDCI with HCPA, HCPB and HCPC engine codesDisclaimer:this video only
E7ti8.
  • pavl68km16.pages.dev/268
  • pavl68km16.pages.dev/209
  • pavl68km16.pages.dev/57
  • pavl68km16.pages.dev/402
  • pavl68km16.pages.dev/377
  • pavl68km16.pages.dev/463
  • pavl68km16.pages.dev/489
  • pavl68km16.pages.dev/357

    • ford focus 1.6 tdci fuel filter location